Liberon Decking Oil 5 Litre - Clear

Product Information

I have stripped the wood but the finish I have applied has not taken to the wood properly and has dried streaky. What should I do? Hardwoods: Unless the hardwood is very absorbent, best results are achieved by wiping on the oil in very thin coats with a cloth. It is essential that any oil that has not been absorbed into the timber is wiped off thoroughly with a clean lint-free cloth. For new hardwoods, it is recommended to leave the wood exposed for up to 12 months before applying any finish. This allows the grain in the wood to open and breathe and aids penetration and adhesion of the finish. You can expect a slightly darker look for the first few days so don’t panic whilst it’s drying – it’ll eventually come up much clearer and shinier. Give it a goo while to dry – you can’t just rush in. I left my timber to dry for nearly a week as it had been thoroughly soaked and was damp for a fair while in places the sun doesn’t reach much. Obviously if you’re directly exposed to sunlight your timber will be ready to go much faster. I do warn though, don’t get too close or you risk ripping the grain and making it furry!

Drying time is pretty sensible. Touch dry won’t take long at all if your timber was bone dry, but give it 24 hours after the last coat before you walk on it or put anything heavy down. It seems to darken a little for the first few days but brightens up as it fully cures. Pros: The last piece of good news is the different colours – follow this link and you’ll be able to find the colour you’re looking for, be it lighter or darker. However, don’t trust in the picture on the product, still give yourself a chance of maintaining sanity and do a test patch 😀 End grain absorbs more than flat grain hence why it is often darker. To avoid this brush on a coat of the solvent used in the finish ie. water or white spirit etc. on to the end grain before applying the finish.

Liberon decking oil

Allow to penetrate for 15 to 30 minutes, then apply the second coat without waiting for the first to dry

Our courier will return the parcel to their depot and try to deliver it on the next available working day. An hour after the second coating has gone on, test out a patch by scrubbing it thoroughly with a scrubbing brush – make sure that the stain has been removed completely. Once you’re finished, leave the oil to dry out completely for around 24 hours, then repeat the process as necessary (two or three coats are generally required for the best results). Oils often come in natural colours or clear, and enhance the natural appearance of your wood,' explains Jimmy Englezos, senior product manager at Sherwin-Williams. Our courier will send you a 1-hour delivery window on the day of delivery and you have the option to change this if required at no extra charge or you can also let the courier know that you want the parcel left in a safe place.

2.5 Litre

It is vital when using stripper or bleacher to neutralise the wood thoroughly before applying any finishing products. We recommend Wax & Polish Remover to neutralise stripper and bleacher. Allow to dry for at least 24 hours before commencing the wax, oil or varnish process. When using water-based varnishes wood bleacher must be rinsed thoroughly to remove all residues. We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items Oil is also really durable and is easy to maintain – you just need to keep it clean and touch it up every now and then. It’s very resistant to dirt and water so doesn’t require much upkeep at all.' Stir the oil up, pour it out into a suitable container, and apply it to raised features such as railings using your paint brush – use long, even strokes as if you were painting a wall. Don’t panic, it’s a bit lively looking for the first week or two and then it’ll settle down to the colour you can see above 🙂