Joined in 2023 
82 
63 About this deal
Also, the plug on the UPS was a little bit wobbly when plugged into the bottom of the ONT and being black, looked ugly as well, so after considering my options for an hour or so, I came up with a plan to cut the low-voltage wire from the BT ONT plug and connect it to the low-voltage lead from the UPS. If you’ve received excellent service from an Openreach engineer, you can also get in touch and pass over your positive feedback.
If you get wayleave payments from us by cheque, we might have asked you to give us your bank details so we can pay you by BACS.
If either of these apply to you, you should talk to a broadband provider to see which services are available to you. Check that the thin white fibre optic cable coming into your Openreach fibre modem is inserted and not damaged. Openreach is required to keep their powered copper wire services to the house until such a time that 80% of a brown field housing estate gets FTTP digital phone service. The Ethernet cable (red ends) must be plugged into the WAN port (or port 4) on your Hub and the other end into the Openreach modem's PORT1/LAN1 port - the number of ports on these modems can vary. It was concerned that as BT owned the network most other broadband providers used, it held a monopoly over the UK telecoms industry, as well as an unfair advantage.
Strangely was looking at our village halls BT Hub a few days ago and that had a PSU with quite a long cable, looked like 2 metres plus! We'll let you know all of the plans before we start work to make sure that you're totally happy with everything and the work we need to carry out.
This modem comes with a back-up battery Pack (BBU) in a white box, which enables your phone to continue to work after a power cut.
All internal wiring and extension sockets beyond the ONT are the responsibility of the developer or property owner.
Openreach maintains and builds the phone and broadband infrastructure that serves UK’s homes and businesses. If you aren't in our current build plans but think there’s a high level of demand in your area, then there’s also the option of a Fibre Community Partnership (FCP).
ADSL2+ is now available at nearly all exchanges across the UK with slightly faster data transfer rates of around 10-11Mb. Ethernet connection is normal between Openreach fibre modem and Hub (Port 1 is where engineer will install).I don't know what " brown field housing estates" are, I just thought they were housing build on previouslyused commercialland. Operators do it in their own proprietary way so Openreach don’t mix and match vendors across the PON. Same wholesale product, same terms, the bonuses I mentioned above relative to terminating and having handovers in loads of much smaller, rural areas.
Great Deal 
New Comment