Everbuild Black Jack 901 | Solvent Based, Full Bodied Black Bitumen Paint - Protective Coating for Concrete Structures, Stone & Concrete Screeds - 5 Litre - Black

Product Information

Hi there. Can bitumen be used to coat the inside of a vegetable planter? I. E is it safe? The planter will have a membrane liner but these are usually slightly porous.

Everbuild Black Jack 905 All Weather Roof Coating, Black, 5

Chalk and mineral paint formulated for wooden furniture. Also suitable for laminate, powder coated radiators, UPVC, ceramic wall tiles (we recommend avoiding very wet areas like shower/bath surrounds). Here is some useful information about painting tiles. Can be used for internal walls – in this case, thinning with up to 10% tap water is advised to ease application. Best results are obtained in warm (minimum 10°C), dry conditions and we recommend application of 2 coats. Use Conventional or HVLP spray, brush or roller. Our bitumen paint products Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, downpipes, fences, railings, gates etc. However, I trialled this a number of years ago, and have since used it on both smooth planed timber fascias and rough sawn wood. Not only does it give a beautiful finish, but there have been no signs of flaking whatsoever, and all that timber is South-facing. Some trellis work which only received a single coat is now showing areas of weathering - but no flaking. A top-up coat can just be slapped on to the secure layer below.

How to Prep and Paint Terracotta Pots

I have looked at several makes of bitumen paint, and there are several which include wood in their list of uses, so it does seem that you can apply bitumen paint to wood in accordance with given instructions.

Everbuild Black Jack 901 Black Bitumen Paint - 5 Litres

It is not wise to use bituminous paints on general painted surfaces. If applied over existing paint the solvent may soften the paint beneath. If subsequently painted over with an ordinary oil paint then it will bleed through. Protecting coating on concrete etc: Due to the porous nature of concrete and some stone surfaces, an initial primer coat of Everbuild primer should be applied. Protect skin and eyes and apply in well ventilated areas outdoors, do not inhale. Do not apply near open flames, sparks, heat or hot surfaces. sources. Dispose of any waste responsibly as it is toxic to wildlife. Do not swallow. Would bitumen paint be suitable for protecting the underside of a steel trailer?Usually cheaper than many other coatings offering similar weather proofing performance, it’s an economical option Avoid painting in direct sunlight, only when the air and surface temperatures are between 10 oC and 32 oC and humidity is less than 85%. Do not apply if, in the following 48 hours, there is likelihood of rain, frost, fog, condensation or if the temperature is likely to drop lower than 10 oC. This means that certain times of the year are unsuitable for painting outside projects - as a general rule of thumb Summer is recommended. Felt adhesive such as Carbobond, is a solvent based mixture of bitumen, fillers and fibres, formulated for bonding felt (as the name suggests), so it is better to apply this first then the roofing felt which will (of course) adhere to it. Bitumen paint can then be applied on top of the roofing felt for extra protection and/or aesthetics. Will bitumen paint cure a leaking concrete roof?

Bitumen paint | Screwfix Community Forum Bitumen paint | Screwfix Community Forum

A 750ml tin will provide a single coat of up to 12.5m 2. For a durable finish, a minimum of 2 coats is required, so your 750ml tin should provide full coverage for just over 6m 2 on non-porous surfaces like laminate or metal. Limited Edition 500ml tins will provide a single coat of up to 8. 5m 2 . Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! For a great demonstration, see our video. I’m hoping for some advice regarding the additional protection of galvanized steel below ground level. Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete. Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.

An Introduction To Frenchic’s Al Fresco Inside/Outside Range

Type:Paint Size:5 litre Brand:Everbuild Category:Roof Seal & Bitumen Products Height:233mm Width:181mm Depth:185mm Weight:5.02kg MPN:486939 Hi, I was thinking of giving two coats to the inside of some new timber planters I am making. Do you know if this would be ok and not effect any vegetables I intend to grow in the planters? We have also been asked what products can be painted over a previously bitumen painted concrete roof. Generally, it is fine to paint a bitumen paint over another bitumen product; if the reason for painting is to change the colour, then consider a bituminous barn paint like Carbolustre or Green bitumen paint.

Questions about bitumen paints - Answered Palatine Paints

Suited to application on multiple surface types from iron, steel, concrete through to masonry and woodPreparing the surface is of vital importance to enhance the adhesion and life of the coating. All surfaces must be thoroughly dry and clean as well as sound and stable. Metal surfaces should be wire brushed to remove rust and for long-term protection, a rust-inhibitive product such as zinc phosphate or red lead should be used. Blistered or loose paint as well as tar-based paint systems should be eliminated. New galvanised surfaces should be treated with a proprietary etch primer or roughened with a wire brush. You’ll find bitumen paints used in all sorts of situations. A versatile paint, it can be used on both ferrous and non-ferrous metals as well as concrete, wood and masonry.