Michelin programmable rapid tyre inflator

Michelin High Power Rapid Tire Inflator For Cars - 12266 Michelin High Power Rapid Tire Inflator For Cars - 12266

I have been using this product for the last 6 to 7 years (at least) and every time it works like a charm. Very user-friendly and compact to store. Inflates 10 psi to 36 psi in a couple of mins (just used it yesterday on my Alto). The Michelin tyre inflator can be used to inflate tyres of cars, motorcycles, trailers, caravans and bicycles. You can also use it to inflate footballs, toys and other inflatable items. The maximum tyre inflation pressure for cars is 50 PSI and bicycle tyres can be inflated up to 100 PSI. Note that higher pressures can be achieved in cycle tyres due to their smaller air volumes compared to car tyres.I'm using a Windek inflator from 2017 and is working fine. The only problem is screwing and unscrewing the nozzle is a pain. I had posted a query on the other inflator thread as well. However the +/- buttons don't work reliably and also the button to change kPa, PSI and Bar. This is something I faced from day 1. The 10 ft long power cord and the 2 ft long air hose ensure that the inflator can easily reach any tyre of the car:

Michelin User Guide - CAEurope Michelin User Guide - CAEurope

Viair is pretty much the benchmark internationally in tyre inflators. Mine is 4 + years now and used to fill air in all 4 of my cars. I have two of these, michelin 12266 tyre inflators, the first one bought in 2019, and the second in 2021, both are working flawlessly. Only issue with the first one is that the preset buttons don’t work on the first go, you have to press and hold the (-) button to make them work. But it doesn’t bother me much as I keep it in my Diesel Creta, and maintain same pressure of 35psi in all four tyres, and once set at a value, it remains there, even after switching off. The one bought in 2021 works fine, kept in the Ignis, where front and rear pressure value is different. Overall satisfied with the product.Plug the power cord into the 12V power outlet in your car. The 10 ft long power cord ensures that the inflator can reach any tyre of the vehicle with ease. Screw the nozzle of the air hose onto the valve of the tyre. Swastik fabs is the official importer for Viair. Viair is pretty much the benchmark internationally in tyre inflators. Mine is 4 + years now and used to fill air in all 4 of my cars. Turn the key to "accessory" mode and the display screen comes alive. Now use the "+" and "-" buttons to pre-set the desired tyre pressure and press the yellow ON/OFF switch. The inflator immediately starts pumping up the tyre. Once the pre-set pressure is reached, the inflator switches off on its own. Once done, unscrew the nozzle from the valve. I have been using this product for last 6 to 7 years (at least) and every time it works like a charm . Very user friendly and compact to store. Inflates 10 psi to 36 psi in a couple of mins (just used it yesterday on my Alto).