About this deal
Diese Teile können mit Sikaflex®-291i veklebt und / oder abgedichtet werden. Bleiben die Fugen sichtbar und sind Witterungseinflüssen ausgesetzt, dann verwenden Sie bitte Sikaflex®-591 oder Sikaflex®-295 UV. Winches, windlasses are subject to high mechanical stresses, fans, hatches and hatch covers to low stresses. To make sure your fittings are sealed strongly we recommend the following:
This is a high-strength, marine-grade adhesive based on advanced hybrid MS polymer technology, specifically designed for structural and dynamically stressed bonding applications in the boatbuilding and maintenance industries. It offers high initial grab and anti-vibration bonding and bedding properties. It can be applied to wet or humid surfaces, has high UV and saltwater resistance, is virtually odourless and can be painted over. Tjek forbehandlingsoversigten for behandling af underlag før limning, og følg processen i henhold til applikationsguiden. Verklebung und / oder Abdichtung von Teilen, die geringen mechanischen Beanspruchungen ausgesetzt sindCohesive failure: The adhesive/sealant fails before the adhesive releases from the substrate – this usually gives a higher strength value than through adhesive failure.
There are a variety of adhesive products on the market, some designated specifically for the marine market and many more available from local DIY stores or builders’ merchants. Product data sheets are available for each of the adhesives we tested: these varied in the amount of additional information they presented. The 3M data sheets were the most helpful. Your supplier should be able to provide you with the relevant data and safety sheets.Liimasauman riittävän kerrosvahvuuden varmistamiseksi suosittelemme sauman levittämistä poikkileikkaukseltaan kolmiomaisena (kts. piirros alla). Tensile stress: The force is perpendicular to the cross-sectional area under load. Products on test: Verklebung und / oder Abdichtung von Teilen, die hohen mechanischen Beanspruchungen ausgesetzt sind These fittings can be effectively bedded and sealed with only Sikaflex®-291i or if the joint remains visible and is exposed to weathering, then use Sikaflex®-591 or Sikaflex®-295 UV.