Joined in 2023 
82 
63 About this deal
The 21700 battery included is an Olight ORB-217C50, Lithium-Ion battery with a capacity of 5000mAh and arrived with 3.7Volts. This has a lot more capacity than a regular 18650 battery, but it’s only slightly larger. Keep in mind that you can still use these batteries in normal flashlights, as long as it doesn’t touch the negative metal ring around the positive terminal! However, I knew after reading Steven’s review of the Warrior Mini 2, that Olight makes excellent products and would likely exceed my expectations. B.If you have fully charged your flashlight and it continues to turn off on its own, it may need a new battery. My flashlight does not turn on or charge The waterproof features only add to the tactical functionality of the Warrior 3. With max thanks to this product’s waterproofing, you will find yourself on the right side of durability with the Warrior 3. Performance, Modes, Beam Distance
The proximity sensor received an update. The main difference is that it is only activated during the first 2 seconds of power on. So if you use it for more than a couple seconds, the proximity doesn’t reduce the output. Firmware / UI Additional info: It is powered using the included Olight 21700 5000 mAh customised lithium-ion battery, which is recharged inside the torch using the included MCC3 magnetic charging cable. Simply connect the magnet to the base of the Warrior 3S and plug the USB-A end into a USB power source. The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 5 hours, 30 minutes when using a 5V, 2A output. The Warrior 3 is a high quality flashlight. It even comes with an optional remote switch. The remote switch will allow you to operate this flashlight remotely while mounted to your setup. if you want to use the Warrior 3 with a gun, you can get the optional remote pressure switch that attaches to the rear end. The tail cap is the only thing you can remove by hand. The rest of the Warrior 3S is glued to keep curious people out.After all, what is there not to love? The Warrior 3 is a beautiful everyday carry flashlight. People loved the rechargeable feature and particularly praised the tactical features of this flashlight and the brightness. Yes, including Moon even when Moon is not part of the normal cycle. This is a great and useful feature for some, but unnecessary for others. Because if it only remembered low medium or high, you could have shortcuts to more modes.
The runtime test was done with the 50cm home made integrating sphere, combined with the Extech SDL400 data logging Lux Meter.
Timer Operation: When the light is on, double press the switch and hold it until it flashes, flashing once means shorter timer, flashing twice means longer timer. Olight is a well know flashlight manufacturer with lots and lots of different kinds of flashlights in their arsenal. The emitter of choice for this light is a Luminus SFT-40. The temperature is Cool White, at 6000K-7000K. This emitter is under a TIR, but there is no glass over the TIR. That’s a fairly big and unfortunate loss here. Pressing the side power button briefly switches the torch on, while pressing it briefly again switches it off. One use that may be overlooked for this light is it performs well for long-distance runs. The clip holds tight and the lightweight makes it easy to carry along. Since it’s getting dark before I get home from work, I appreciate being able to bring this light along when running in the dark. Performance
Great Deal 
New Comment