Defender Plastic Anti-Bird Spikes Pack | 30 m with Glue | Pigeon Control Guide | Various Size Packs

Product Information

Dampen down the area with a disinfectant spray like Germ Clear™ Bird Droppings Disinfectant Spray and remove any loose droppings or debris. If a seagull has already been using the area it may be heavily soiled with seagull droppings. If this is the case please see our "How to Safely Remove Bird Droppings Guide" for more in-depth cleaning advice. This high-quality, UK-manufactured pigeon and seagull roof spike has a 25 Year "No Rust" Warranty when installed in the UK. This means the pins will not tarnish whatever the weather throws at it. The tough base is made from super strong polycarbonate, ensuring that, once the roof spikes have been installed, there is no need to replace them for years to come. The householder, therefore, has complete peace of mind that their property will remain bird free. Seagull Deterrent Spikes Made in the UK Add extra rows behind the first if needed. Leave as small a gap as possible between the rows; the pins should be almost touching to prevent the pigeons or seagulls from gaining access. Leave no gap bigger than 2.5 cm anywhere to prevent a pigeon or seagull from gaining a foothold. If soiled with droppings, we would always recommend dampening down the area with a disinfectant spray like Germ Clear™ Bird Droppings Disinfectant Spray. Once this has been left to soak into the droppings, you can use a scraper, stiff brush, warm soapy water and a cloth to make sure the roof apex is clean and dry. Ideally leave the area for 24 hours to ensure it is fully dry. As Defender® Fixing Silicone is used predominantly outside that are exposed to the elements, so it is good to know that this spike adhesive works perfectly in temperatures ranging from -60 °C to 180 °C and is also formulated to be corrosion free. The Defender® Fixing Silicone has a life expectancy of 35 years. High Quality Defender® Fixing Silicone

The good news is that they can easily be protected. There is a range of suitable Defender® Bird Spikes for this job, which will come down to the width of your timber cross beams. Most Defender® Bird Spikes are available in plastic or steel. Our steel spikes come with a 25 Year Warranty, and plastic spikes have a 15 Year Warranty. They all do the same job of humanely stopping pigeons from landing on your pergola.The Defender® Bird Spike range has a spike suitable for pigeons, seagulls and even small garden birds like sparrows. Deciding what bird your issue is caused by is the first step. We have a range of spikes for pigeons - these will stop pigeons and like sized birds. Our spikes for seagulls have taller pins to allow for the gulls longer legs. It is important to remember that they will also work for pigeons. We also have a spike for small birds - stopping small garden birds like sparrows and starlings but also the larger birds like pigeons and seagulls too. The Defender® Wide Bird Spike has been produced with a UV Stabilised Polycarbonate base into which the 10 protruding 304 Grade stainless steel pins are inserted. This premium bird spike is guaranteed not to rust or become brittle in any weather conditions as the steel has excellent corrosion-resistant properties and, for assurance, it comes with a 25-Year “No Rust” Warranty valid for installations in the UK. This tried and tested Defender® Seagull Deterrent Spike is the toughest gull deterrent on the UK and worldwide market and comes with a 25-Year “No Rust” Warranty when installed in the UK. This seagull spike has been made in the UK with the best quality materials that will withstand the most persistent and strong seagulls. The spike pins are made from 304 Grade stainless steel and are inserted by hand to ensure they are securely fixed in place. Each pin is inserted into a Durolon UV Stabilised Polycarbonate base. This ensures the spikes do not become damaged due to the adverse effects of extreme weather. Seagull Deterrent Spikes Made in the UK The Defender® Narrow Stainless Steel Bird Prevention Spikes are made from 304 Grade steel wires which protrude from a super tough Durolon UV Stabilised Polycarbonate base. This hard-wearing bird spike will triumph in all weather conditions and comes with a UK 25 Year "No Rust” Warranty. Some lower-quality spikes available can rust in a matter of years or even months - but these superior Defender® Narrow Stainless Steel Bird Spikes will protect your home without degrading. Snappable SectionsEach strip of Thistle® Bird and Pest Deterrent is 333 mm long, however, if a smaller strip is needed to finish a run or a small fence post needs proofing, the bird and pest spike can be snapped by hand in to shorter lengths. Along the base of the Defender® Thistle® are 4 grooves where the spike can be snapped into 5 smaller pieces that are 65 mm long. This is useful when installing on undulating, curved or uneven surfaces.

As an alternative to the standard 304 Grade Stainless Steel, we now have the option to offer the Defender® Wide Stainless Steel in Marine 316 Grade Stainless Steel. Due to the added Molybdenum, this steel is particularly corrosion resistant to sodium chloride which makes it able to withstand harsher environments such as exposed coastal areas.All our Defender® Bird Spikes have snappable sections along the base and can easily be snapped using your fingers into smaller pieces. This helps when you finish a row or need to spike smaller or uneven areas. If a seagull has already been using the area it may be heavily soiled with seagull droppings. If this is the case please see our "How to safely clean bird droppings guide" guide for more in-depth cleaning advice.

Marine Grade Stainless Steel is now offered as an alternative to 304 Stainless Steel. It is particularly resistant to corrosion caused by sodium chloride. This makes it the ideal choice for use in harsh coastal areas. First, spray the area with a disinfectant to soften and loosen dried droppings. If using Germ Clear™, leave to soak for a minimum of 5 minutes. Then use the scraper to remove the excess droppings or nesting debris into the bin bag; repeat this process several times. When all the loose debris is removed, including moss, lichen, dirt and dust, use the stiff brush, sponge and soapy water to remove any remaining residue until completely clean. Once completed, the cleaned areas must be left to dry for a minimum of 24 hours before installation. The gutter spike has 2 clips attached that just slip over the edge of the guttering. This mechanism places the gutter strip in the centre of the gutter. However, as it "hovers" above the base of the gutter, it allows for the free flow of rainwater beneath. These spikes are designed for pigeons and like-sized birds. They are a great solution for areas where pigeons are roosting or perching. However, they can also be used in high-pressure areas where pigeons are trying to nest or sleep overnight. Where can I use wide plastic spikes? Step 1 - Clean the Area: It is essential to thoroughly clean and dry the area before starting installation. Dampen down the area with a disinfectant spray like Germ Clear™ Bird Droppings Disinfectant Spray and remove any loose droppings or debris. If a pigeon has already been using the area it may be heavily soiled with bird droppings. If this is the case please see our "How to safely clean bird droppings guide" guide for more in-depth cleaning advice.

Defender® Thistle® Bird & Pest Deterrent - Key Info

There are many scenarios where birds can cause problems, such as roosting on chimney pots, nesting under solar panels and sitting in gutters. We have a solution for all these issues and have created a visual guide to help you understand which products can be used where - this can be viewed here Not Sure What to Buy?.

The Defender® Narrow Stainless Steel Bird Prevention Spikes are made from 304 Grade steel wires which protrude from a super tough Durolon UV Stabilised Polycarbonate base. This hard-wearing bird spike will triumph in all weather conditions and comes with a 25 Year "No Rust” Warranty when installed in the UK. Some lower-quality spikes available on the market can rust in a matter of years or even months - but these superior Defender® Narrow Stainless Steel Bird Spikes will protect your for years to come. Made in the UKStep 5 - Full Protection: Repeat the process until the area is fully protected. Each strip of the Thistle® Spike is 333 mm long and can be snapped by hand into shorter lengths. Along the base are grooves where the spike can be snapped by hand. This is useful when installing on undulating, curved or uneven surfaces. Every effort should be made to protect the whole area, and no gaps should be left between additional rows. Seagulls are prevalent in coastal areas so we now offer the Defender® Gull Spike in 316 Marine Grade Stainless Steel as an alternative to the standard 304 Grade Stainless Steel. 316 steel has added Molybdenum which makes it particularly resistant to sodium chloride and therefore perfect for the harsher environment of the coast. Bird spikes to stop birds sitting or perching on surfaces whilst being humane and effective. Pigeon spikes and seagull spikes in both UV stabilised polycarbonate plastic spikes or stainless steel spikes Along the base of of each strip of spikes there are snap-off points making it easy to fit the spikes in small areas to the exact size required. Along the base of the Defender® Gull Spikes are 9 breakable sections that can simply be snapped apart with your fingers. This makes it easy to fit the spike to any length of ledge without leaving any areas unprotected.