GEEKVAPE Geek Vape | Aegis Solo 2 / S100 Kit | 100W | Single 18650 | 2ml Z Tank - Rainbow

Product Information

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment To replace the Z series coil, you need to unscrew the base off of the container. Once you’ve found it, the coil should easily pop out, but you do get a tool if you can’t remove it. The two included were the Z0.2 and Z0.25. Starting with the Z0.2 coil I found it best around 70 watts. The flavor started off poorly but broke in after a tank, although it was still just ok. It only lasted about 55 mL which is low by today’s standards. Overall, not a very good coil. Then with the Z0.25, which I found best around 50 watts. Flavor was a little better than the Z0.4 coil but still just ok. Life was the same at around 55 mL.

Thanks to Variable Wattage mode you can set the power level between 5 - 100W. This means you can discover a vape that's personal to you. Though DTL coils are included, thanks to the compatible range of GeekVape Z coils, you also can select a 0.4 Ohm RDTL (Restricted Direct To Lung) coil that produces a little less vapour. Beyond this, the 1.08 inch colour screen makes navigating the menu simple to do. We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times. To manipulate the screen brightness, you just need to hold down the firing button on the front of the device at the same time as the ‘up’ button, and the display screen will brighten. Pressing the ‘down’ button will darken the screen. An enlarged filling port located under the lid of the GeekVape Z 2021 sub ohm tank makes topping up e-liquid easy. As well as that, the adjustable top airflow gives you the option of a tighter or looser draw, so you can find an inhale that feels right. The airflow inlet is built into the top part of the tank to stop leaks too. The included coils have a mesh build that will heat your e-liquid up more evenly and deliver an improved flavour. To match the sub ohm coils, we'd recommend an e-liquid that has a 70% VG concentration or higher.

Verdict

Shop the Geek Vape S100 Aegis Solo 2Starter Kit, utilizing a single 18650 battery, 5-100W output range, and is paired with the 2021 rendition of the Zeus Tank. Holding up to 5.5mL of your favorite eJuice within the tank, the new Geek Vape Aegis Solo 2 100W Starter Kit utilizes the Geek Vape Z Coil Series to deliver outstanding flavor and vapor. Constructed from durable zinc-alloy, the chassis is IP67 rated, preventing intrusion from dust or water and mitigates damage from any falls or drops. Utilizing a single high-amp 18650 installed in the base behind a threaded battery cap, the Geek Vape S100 Kit can deliver up to 100W of power and is a perfect pairing for the Zeus 2021 Tank. This device is intended for sub ohm vaping. Sub ohm vape kits require a greater amount of knowledge and experience to use safely. They use specially designed coils that register below 1.0 Ohm resistance, for use at higher wattages. These kits will also feature advanced modes that require a knowledge of vaping to be used correctly. To access the battery compartment you unscrew a cap on the underside the box. Rather surprisingly, there’s no degassing vent on the model we reviewed. It’s a pity, because having one makes it much safer for the user. But there is a good reason for there being no degassing vent: the box has IP68 protection, which guarantees that it is airtight. Plus, degassing vents and airtightness are pretty incompatible. The only thing that really changes in the Aegis S100 is that the battery bay in the Geekvape S100 fits a 18650 battery so that you can use your own high-quality battery inside your mod. Also, the battery is easy to put in since the kit contains battery orientation. So:- now I've gone and dropped my Smok Morph (which smashed into pieces! now just about working with swathes of PVC Tape and rubber bands attached), I need a second unit fast.

On the front is a colour screen, a fire button and two buttons to adjust the settings. These feel great and press perfectly. There’s no play at all, despite the small size of the bottom buttons. They are easy to press and make a little noise, as you’d expect. It’s perfect in this respect too.

First impressions

The Z tank is a top adjustable airflow tank, which is great because it prevents the leakage of vape juice that bottom airflow tanks just can’t manage. However, an issue with this new 2021 tank is that it’s easy to accidentally dislodge the airflow control ring when removing the top cap since it is thin.

Powered by an external 18650 battery cell combined with the Geekvape Z Subohm 2021 tank to provide an excellent, long-lasting vaping experience.Also, the wattage has a high range, all the way from 5W to 100W. However, you may not be able to get to the higher wattages if you do not use a good battery. Another great feature, though, is that the kit hits your set wattage instantly.