Audi 8 W0060866 °C SD Memory Card/Micro SDHC Card Activation Document

Product Information

Third generation MMI system including high resolution (400x240) 6.5” colour TFT display and two SD card readers (one of which Have very recently bought a 2016 A4 1.4tfsi Sport and am starting to pull my hair out with Audi Connect. As the car is secondhand the obligatory 3-month trial has run its course. Along with that, the SD card I gather is supposed to come with the car is missing. Car was bought from a non-Audi dealership who know nothing about the card. I spoke to the dealer and they have sent me a 'Europa 2013' SD card with a part number 8X0919884E. Obviously not the original card that came with the car. The are so many cards available I am a bit lost as to what to go for in a hope to to get a dud or pay for something that is incorrect. So my question is: will the SD card with part number 8X0919884E work with my A6 if it gets activated?

Simon here, new to the forum and new to being an Audi owner. Sorry to not come loaded with experience to share but hope on time to be able to learn and support in return. The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp. is used by the Navigation SD card). Navigation functionality includes advanced speech recognition. Also includes Audi MusicSorry for the awful photo resolution; it was taken on my iPhone and is several years old! Applying Speed Camera locations to Maps Your SD card contents should look similar to this if you've done it correctly; note the metainfo2.txt file, this is key as it contains all the hashes of various files and the mappings to the update file, it is also what the car MMI uses to identify the update file, and without it, the car will not recognise that there's an update file. Updating the Car Sitting comfortably inside the interior of your Audi, locate the SD ports on the center console just behind the gearshift and MMI knob.

I plug my phone in ti the USB port and use the Android Auto (or Apple Play) which allows Google Maps. This meticulously crafted update is solely for Audi MMI 3G+, 3GP HDD Navigation Systems. Ensure seamless compatibility by verifying your current firmware and database version through: Setup -> Settings -> Version Information. Cutting-Edge Software Details: And I found the Audi MMI/SD system gives the most bizzare routes too frequently, wereas the free Waze or Google Maps are far better and will also route around current traffic dynamically and you get upto date maps always. Because I happen to have the Audi MMI/SD based maps, I use it sometimes to show an overview of a longer journey (according to Audi) just for the benefit of passengers who can see it and want to answer the 'are we nearly there yet?' question themselves ;-)Once you have verified you have the correct version of Audi MMI, the next step is to format an SD card as exFAT and copy the contents of the maps 7zip file. (Extract the 7zip to a folder and copy its contents to the SD card). Navigate effortlessly with support for multiple languages including English, German, French, Italian, Dutch, Portuguese, and Spanish. Guidance and Support: Now the fun part/bit that just takes a bit of time, we will create the bundle manually. First thing to do is load up POIBase on your windows machine, this can be done on mac but it just works better on Windows: First-time poster here so apologies if I'm in the wrong place. You guys have this place pretty well divided up. I have looked around - and for SD card models - there is no other way but going through Audi - or getting a stand alone unit.

Once your SD card is loaded with the files and bundle, it is time to load it up in the car. therefore plug it into the SD1 port, go to MENU, Setup MMI, System update, SD1, and Start update; as the files are tiny, this will take under a minute but depending on how big your maps file was initially, it could take longer as it is overlaying the points of interest to the sat nav already in place. If only Audi offered a map update service at a reasonable price - for me it should really be included in the price of the car (most good sat nav suppliers now give free lifetime map updates) and I don't understand why major manufacturers don't tie in with Garmin/Tom Tom/Google to provide the navigation with free map updates. The same map update is used not only in Audi MMI Navigation Plus (A3 A4 A5 A6 A7 A8 Q2 Q5 Q7 TT R8) but also in Volkswagen Discover Pro (Golf, Passat, Arteon), Seat Navi Plus (Leon, Ateca), and Skoda Columbus (Octavia, Superb), Porsche, and Bentley cars. I am updating an Audi R8 V10+ 2017 UK car for this example. To find out whether your card isn't paired with another car they will do it but will charge you the activation fee regardless. If it can be paired then great, if not they will charge for a new SD card. postcode recognition. Includes AM/FM tuner with TP memo function. Single front-loading CD player with MP3 compatibility.To be honest though it seems really expensive for something that an iPhone does much better for free. Once you've selected an icon, select the POI file, which is the CSV that matches the respective icon for the category of camera. Leave the column configuration as default, then select Add POI category, which will show you the icon you've selected and the name of the category: Upon completion, the dashboard will show 'Component has been updated successfully. Navigation database Current Version: 2022/2023:

Description Introducing the Latest 2023-24 Sat Nav SD Update for Audi MMI 3G+, 3GP HDD Navigation Systems Exclusive Compatibility: Satellite Navigation system – SD card-based. Route planning and guidance using voice, pictogram and 2D mapping. 7-digitWith the maps update, this process will take anywhere from 40 minutes to over an hour depending on the speed of the SD card used for the process the ignition also needs to be on therefore it is recommended that you either put the car on a charger to ensure the battery does not die or go for a drive.