Vitax 5FW500 Green Up Lawn Care Feed & Weed Concentrate 500ML

Product Information

If you already own a fertiliser spreader, applying granular fertiliser to the lawn will be simple. Otherwise, liquid fertiliser may be an easier option – it can be applied with a watering can or garden sprayer . Alternatively, look in our Weedkillers for gardeners document– sections 1b, cand d–for the corresponding product trade names (such as dicamba/mecoprop-P is sold as ‘Resolva Lawn Weedkiller Extra’) You don’t have to keep your dog off the lawn if you choose organic weed and feed options. Use an organic weed-prevention product in combination with a dog-safe fertilizer if you don’t want to keep your dog off the lawn after spreading weed and feed. With this combination, your lawn pet will be safe while you feed your grass and prevent weeds from growing. To treat 12m², use 2 measures (60ml) in 6 litres of water when using a watering can with a fine rose or sprinkler bar, or 60ml in 1 litre of water when applying by sprayer. Set the sprayer nozzle to a medium setting. Avoid too fine a spray as drift onto neighbouring plants may occur.

No, weed and feed products are not safe for dogs to walk on immediately after their application. After treating your lawn, you should always wait at least 48 to 72 hours before allowing pets around treated areas. May cause asthma-like (reactive airways) symptoms. Bronchodilators, expectorants,antitussives and corticosteroids may be of help. Chemical eye burns may requireextended irrigation. Obtain prompt consultation, preferably from anophthalmologist. If burn is present, treat as any thermal burn, after decontamination.No specific antidote. Treatment of exposure should be directed at the control ofsymptoms and the clinical condition of the patient. Have the Safety Data Sheet, andif available, the product container or label with you when calling a poison controlcentre or doctor, or going for treatment.

To get this liquid weed and feed to do its job well, give it a few days at least since you’ve just your grass, and then once applied, give it a couple of days before you cut again. That’ll give the maximum chance of absorption.

Method 2: Plants usually easily killed using one or two applications of weedkillers containing 2,4-D plus mecoprop-P or 2,4-D plus dicamba. Examples include Doff Complete Lawn Feed, Weed & Mosskiller,Vitax All in One Lawn Feed, Weed & Mosskiller or Westland Aftercut All-in-One Feed, Weed & Mosskiller (also contains fertiliser and mosskiller). You’ll get the best results from scarifying a few days before but otherwise this will give you great looking lawn improvements in two weeks. A lot of people won’t use any other product after using liquid Vitax. That says plenty about this handy liquid version. Mark out areas to be treated. Apply evenly at 32g/m2 over the marked area with suitably calibrated granular applicator. It will kill weeds present at time of application but will not prevent weeds from germinating. Following treatment do not mow the affected area for three days to allow full uptake by the weeds. Half fill the watering can or spraying with water then add the weedkiller plus the remaining water, mix thoroughly and use immediately.The NPK (nitrogen, phosphorus, potassium) ratio is 6-9-6, and the high phosphorus content is what helps this product better promote the health of germinating seeds compared to other lawn feeds. Nitrogen is responsible for leaf growth, and potassium encourages plants to grow and function correctly.