Mapei Mapesil AC 111 Solvent-Free Silicone Silver Grey 310ml

Product Information

Sealing joints between sinks or sanitary ware and ceramic tiles in kitchens, bathrooms and showers with colours coordinated with the Mapei coloured grout ranges. Under certain conditions Mapei Mapesil LM Silicone may have a water-repellent effect along the edges of joints. This effect is only noticeable when surfaces are wet and is invisible when the same surfaces are dry. This phenomenon, however, has no effect on the product’s performance characteristics. Do not use Mapei Primer FD when sealing stone or marble. To control the depth of the joint and to prevent Mapei Mapesil AC Silicone from adhering to the base, the bottom of the joint should be filled with a sized Mapefoam, a polyethylene cord For sealing floor joints subject to heavy traffic, use a polyurethane (e.g. Mapeflex PU 45 FT) or epoxy-polyurethane (e.g. Mapeflex PU20) sealant.

Mapei Mapesil AC Silicone is a solvent-free, acetic crosslinking, mildew-resistant silicone sealant with low modulus of elasticity, available in 42 colours and transparent, to match the range of Mapei Coloured Grouts. After first having used a bonding enhancer, such as Mapei Primer FD, Mapei Mapesil AC Silicone can also be used on concrete, wood, metal, painted surfaces, plastic and rubber. Mapei Mapesil LM Silicone delays the formation of surface mould. Mapei Mapesil LM generally offers good resistance to chemical agents. However, because of the wide range of products and service conditions, if in doubt carry out preliminary tests beforehand. The resistance of Mapei Mapesil AC to chemical agents is generally excellent; however, due to the numerous products and working conditions to which Mapei Mapesil AC can be applied, it is always advisable to do a sample test in cases of doubt. Where Mapei Mapesil AC is to be applied in areas of continuous immersion, i.e. inside a swimming pool tank, the joints must be primed using Mapei Primer FD.The use of Mapei Mapesil AC is not recommended on highly plasticised material or on bituminous surfaces because of the release of substances that reduce bonding and penetrate into the sealant, altering the colour and resistance.

Do not apply Mapesil LM Silicone on rubber, heavily-plasticised plastics or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond or penetrate into the sealant leading to a variation in colour and mechanical characteristics. When Mapesil LM is constantly immersed in treated water typically found in swimming pools its physical-mechanics may be affected prematurely. Given the wide range of products used to treat water and the actual quantities employed, its suitability over long periods may only be guaranteed following specific laboratory testing. Excellent durability. Seals remain unchanged even after many years exposure to climatic extremes, industrial pollution, sudden temperature changes and immersion in water; For sealing surfaces sensitive to acids such as lime stone, use a neutral silicone sealant (e.g. Mapesil LM). Sealing joints between sinks or sanitary ware and ceramic tiles in kitchens, bathrooms and showers with colours coordinated with the grouts.Sealing joints in wall and floor coverings of ceramic and cement, provided they are not subject to heavy abrasion. Mapei Mapesil LM is particularly suitable for surfaces sensitive to acids on which conventional neutral or acid sealants normally provoke changes in colour or staining of the substrate. Mapei Mapesil LM does not emit unpleasant odours, and comes in the form of a thixotropic paste. It is easy to apply on vertical and horizontal surfaces and cures at room temperature through the humidity present in the air to form a flexible sealant. Seals made using Mapei Mapesil LM are extremely stable over time, even when exposed to inclement weather, industrial environments, temperature variations or water. The product remains flexible over a temperature range of between -40°C and +150°C. Do not use Mapei Mapesil LM for sealing doors subject to intense traffic – (use Mapeflex PU45, Mapeflex PU20 or Mapeflex PU21). Make sure your tiling project’s joints and seals stand up to everyday wear and tear with Mapesil, an acetic-crosslinking silicone sealant from the world’s leading manufacturer of tiling grout, adhesives and sealing products, Mapei.