About this deal
Detach the metal frame from the dartboard and take a low-pressure vacuum cleaner or scrub brush to clean the board’s surface.Bristle and dartboards can be delicate, so be careful not to use too much pressure when cleaning.
Steel tip darts may also be used with bristle dartboards that have specially designed holes to hold darts in place without damaging them or anything else in the area, such as a wall.
#2: Electronic Dartboard
properties you should consider to get a successful model. Manufacturing Materials – Sisal or Paper?
There are specific guidelines when it comes to hanging the board. The board should hang so that the bullseye is 5 feet 8 inches off the ground. The toe line, which is the distance from the front of the board to the line at which the dart thrower stands, should measure 7 feet 9¼ inches.Cork dart board is a very old and simple type of dartboard, where the whole board is made from cork. An alternate approach would be to immerse it in water for a few hours. This method will aid in the cork’s softening and facilitate easier handling. Once saturation occurs, a sharp knife can be utilized to trim off any surplus cork resulting in dart expansion.