Microscale BMF129 Micro Set Decal Setting Solution 1FlOz

Product Information

Mirco Sol setting solution is for the most difficult irregulat surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, comforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface." Working life and curing times vary with temperature – higher temperatures decrease working life and cure, lower temperatures increase working life and cure. So you want to do some shading washes on your model after applying the decals. That’s a great idea! It’ll help blend in and provide that perfect matte finish for those who will be seeing it up close or even give them an old painting look if they prefer more of an authentic feel. There are plenty of options: Lahmian Medium is one popular choice, but don’t forget about using painters’ oils. Finale Tips for using Microset and Microsol The micro:bit hardware has been developed since it was created in 2015, with the current iteration (V2) boasting enhanced features which will play a part in our new campaign.

Apply the decal solution directly to the model, then apply it to your surface. Allow drying for at least 30 minutes before applying the flat coat. Then apply a few drops of Micro Sol to the decal, don't worry if there are minor distortions, let the decal dry.

After you've let the decal set and dry out, just give your model a gentle wip with a damp cloth to remove the solution residue. If you miss this stage out, when you seal the decals in with your preferred finish, you'll end up with a slightly blotchy appearance.

If you are using gloss paint, try adding a layer of matte over it after letting your decal dry entirely overnight. This will help keep the gloss from peeling off when removing excess water! CookieYes sets this cookie to record the default button state of the corresponding category and the status of CCPA. It works only in coordination with the primary cookie. Unlike abridged accounts that small businesses can file, you won’t need to include a director’s report. Many micro-entities are also exempt from being audited, so you will not need to file an auditor’s report. Allow 45 seconds to dry before applying Microsol directly onto the decal, then remove excess water with a paper towel.

Micro companies have various options for filing their micro-entity accounts, including the online Companies House WebFiling service. If you’d like to file your accounts with HMRC and Companies House at the same time, you can use the Company Accounts and Tax Online (CATO) service too. You’ll need your Government Gateway details and a Companies House company authentication code to do so. If it’s easier, you can also file your accounts on paper and post them in, but it’s crucial you allow plenty of extra time. Should I use an accountant to file micro company accounts? Mirco Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, comforming perfectly to surface irregularities without distortion.