CRT 9900 CB SS 9900 AM/FM/USB/LSB Radio Station, Black

Product Information

Bands G-L on your radio are allocated to the 12 & 10 meter Ham bands unless licenced you can't use them anyway. They are not on the list because its a list of the most commonly used 11 meter frequencies.

Thanks for your advice. Think I am going to get one....quite like the idea of a new radio instead of my old used radios which keep failing If the cable does anything near what the dx 5000 could do with it then there is no way you would not want it.Would i buy another CRT radio ? Hell yes i would, but and this is the caveat, i would buy it from the same dealer that replaced mine. No matter if it were more expensive or not infact they were not the cheapest on the 7900 at the time.

The radio can also be supplied "expanded" for use on 10m & 11m and covers approx 25-30MHz in this mode. When expanded the output power is selectable from 4W/10W/40W on FM and 4W/10W on AM. GaryWilson wrote: antenna1 wrote: Thanks for the link but that list does not line up with mine e.g on mine band A is UK cb and what is on band A on that list is not on my radio then band G TO L are missing on that list to. It helps a little bit but not the list dealers are preprograming the ss9900 to. cheers If your just rag chewing local or dx ing when its really going either will do a fine job and the better receive of the lincoln you probaby wont notice.

These are the circumstances around me here in cambridge, im sure mileage may vary in differing area's. On a weekly basis, there is around 12 of us that use ukfm for a chinwag, 5 of those 12 are less than 30, of the remaining the eldest is retired, us others are between 40 and 48. Controls are kept to a minimum on the radio, but through the various menu options you can make many adjustments to the radio to optimise it's performance. The microphone has a 4 pin plug on it and does not have channel change buttons on it (which some customers like but others say they catch them by mistake). I will probaly us it mainly FM when in convoy with others so low power but will hopefully try some DX on SSB. The RF power control sets the power for each mode. So when you reduce the power on FM for example, the power for SSB and AM will also be reduced. There's no way to set the output for each mode independently.