VIVO White Dual 13 to 27 inch LCD LED Monitor Desk Mount Stand with C-clamp and Bolt-Through Grommet, Heavy Duty Fully Adjustable Arms for 2 Screens STAND-V002W

Product Information

The sleek, carefully engineered Kontour K1D sure looks the part, and this arm is far from just style over substance. Inside, the forged aluminium arms gas springs enable effortless, perfectly balanced height adjustment which can be easily fine-tuned for different monitor weights. Terms Apply. Promotion ends 3 December 2023. Items are subject to availability. Max 5 units per customer. Monitor size is one exception: While the standard LX is rated for monitors up to 34 inches, the Side-by-Side’s arm is only rated for monitors up to 27 inches. The monitor arms aren’t long enough to fit two 32-inch or 34-inch monitors side-by-side. Vertical arrangements are also supported, though only if one of the two monitors is small (less than 23 inches diagonal). The white MOMO monitor arms take up minimal space when you mount it on your desk. Save even more space by mounting the monitor arm on the wall behind your desk. In addition, neatly concealing the cables and having the monitor floating above the desk keeps your desk even more spacious. Choose comfort, health and sleek design with the white MOMO Monitor Arm! Fitting screens on the monitor arm

The Grovemade unit lifts your screens, which can make them easier to see and create a more ergonomic environment in your office, and it also adds additional space under the monitors. It’s 46 inches wide and can hold up to 100 pounds of weight, and it has a handy aluminum shelf that can hold laptops, documents, or books. The Vogel’s Dual Monitor Adapter allows you to install two monitors vertically or horizontally. It is compatible with any of the PFD monitor arms for mounting your screens on your desk. The adapter can be used for screens up to 24 inches with a weight of up to 6,5kg per monitor.We’re not a fan of the arm’s installation. It has two clamps instead of one unified clamp, which is strange, because the base of the monitor arm is one solid piece. There are roughly a dozen screws to install. And the included cable routing can prove hard to tighten once several cables are held within the routing. Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. The Huanuo HNDS12, like the HNDS6 (below), is a bit fiddly to set up. It has two clamps that need to be adjusted and roughly a dozen screws that need to be installed. The gas springs also require a bit of adjustment to reduce the force provide, at least when used with a 24-inch or 27-inch monitor.

Surprisingly, the Flo has a listed weight limit of 20 pounds and recommends use with monitors weighing at least 7 pounds. Most monitors fit within this range, but some heavier models won’t be compatible with the Flo. The monitors range of adjustment is a bit limited compared to the LX. It offers 11.5 inches of height, 75 degrees of tilt, 180 degrees of swivel, and 360 degrees of rotation. However, a somewhat more limited height adjustment is typical in this category due to the size of monitors these stands are expected to carry. Monitor size limits should be respected as well. It might be possible to attach a 40-inch monitor to an arm meant for a 32-inch monitor. The 40-inch monitor may even come within the arm’s weight limit. A larger monitor will distribute weight differently, however, which could cause an arm’s tension mechanism to fail. How we test monitor arms The HX Monitor Arm is the perfect accessory to add flexibility and superior ergonomics to your monitor or TV. The HX features a new post design, frees up space and allows positioning of your display for greater productivity. Sleek and streamlined, it accommodates large monitors weighing up to 42 lbs (19 kg). Extension/retraction motion and height adjustment capability promote user comfort.

VESA Mounts

For one, you should know which size you need your monitor stand to be. There are models designed to accommodate up to three monitors while maintaining stability and keeping your devices secured. If you spend more time working with multiple monitors, then you should opt for stands that can accommodate them. Otherwise, it is also very inconvenient to keep one monitor on a stand and the other on the desk. It’s natural, given the only slight difference in name, to think the Ergotron HX is merely an uprated version of the Ergotron LX. That’s not the case. This is an entirely different monitor arm which pairs its increased capacity with improved build quality and a more professional look. Long warranty: Monitor arm technology isn’t something that will change radically and warrant a replacement every year or two. Instead, you should expect a monitor arm to last many years and adapt to changes such as a new desk or display. It’s furniture. Because of that, we looked at warranty length and customer support to see which companies would stand behind their models and the arms’ expected years of performance while holding up an expensive monitor (or two). Note that monitor arm warranties don’t include damage to the monitor itself. There’s one unusual feature: a USB hub. This includes two USB ports that are placed at the front of the arm base. Each of these will need to plug in to your computer, which might be a problem if you have a laptop with just a few ports, but it’s a functional bonus.