Tommee Tippee Storage Lids, 6-Count

Product Information

Clean all parts of the bottle and anti-colic venting system thoroughly. Please follow the special cleaning instructions. Sterilise all parts of the bottles and the anti-colic venting system after cleaning and before using. All bottle parts are suitable for sterilisation by steam (electric or microwave), boiling or cold-water tablet/liquid solution. Screw a sterilised milk storage lid onto the bottle and ensure that the lid is tight. Shake well to mix the formula. As shaking can add air to the feed, do not shake again once the remaining water has been added. Be careful when handling hot liquid. To stop a function at any point, press the button that is in use until the lights are no longer illuminated.

If you are using the correct teat, then the small slit in the star valve may be closed. It’s really easy to fix. Hold the star valve up to the light and if you can’t see the slit, pinch it gently between your fingers to re-open. If the star valve has sealed closed, your bottle won’t vent properly. Once you’ve finished expressing, pop the storage lid on the collector bottle and store it in the fridge until you’re ready to feed. Remember - if you open the door to the steriliser at any point during the cycle then the cycle will pause. If this happens during sterilisation its best to start that cycle again. DO NOT leave the star valve on the bottom of the venting tube during cleaning. DO NOT use the venting tube cleaning brush to clean the star valve. These actions can damage the valve and cause your bottle to leak.Rinse all parts using clean water. Reassemble the star valve, venting tube and venting wheel and sterilise.

Replacement Model: Replacement for the third-party water filter Tommee Tippee Perfect Prep Replacement Water Filter, for use with Tommee Tippee Perfect Prep Day & Night machine, Tommee Tippee Closer to Nature Perfect Prep machine. Press this button alongside any of the functions above to allow items to be stored in the steriliser. The steriliser will run a programme that emits 5 minutes of UV light and 5 minutes of drying every 2 hours, to ensure items inside remain sterile. You can open the door and remove one product, then press the storage button again to keep the remaining items inside sterile. Press this button to start a drying then sterilising cycle for 60 minutes in total, drying only first for 25 minutes then sterilising and drying for 35 minutes. Wash items you want to sterilise in warm soapy water, rinse and drain before placing in the steriliser. Don’t put dripping wet items into the steriliser, as water can gather at the base. If there is water at the base or leaking from the steriliser, please turn off the machine and wipe away water.Baby bottles that’ve been sterilised in the UV steriliser may become slightly yellowed in appearance. This is nothing to worry about. The bottles are still safe to use. Always use the steriliser on a flat heat resistant surface and keep it away from inflammables and explosives. Finish assembling the bottle by putting the connected star valve, venting tube and venting wheel inside, then placing the hood on top of the anti-colic teat with screw ring and attaching to the bottle base. DO NOT shake the bottle again. DO NOT store or leave in direct sunlight or near a source of heat or leave in disinfectant (“sterilising solution”) for longer than recommended as this may weaken the teat. The Advanced Anti-Colic bottle is different from other bottles because of its unique anti-colic features. That means you have to make up a bottle in a slightly different way than you may be used to. Don't worry, it will soon become routine.

Open the steriliser door and remove the blue protective film, wipe clean the inside of the steriliser. DO NOT make up a feed with boiled water straight from the kettle. Allow water to cool for 30 minutes before making up a feed. If you wish to leave the products inside the steriliser you can use the storage mode which will keep them sterile. DO NOT leave the star valve on the venting tube when cleaning. DO NOT use the venting tube cleaning brush to clean the star valve. These actions can damage the valve and cause your bottle to leak. There’s no need to boil and cool water when making up a bottle of formula using Perfect Prep. It measures out the right volume of water for different amounts of formula and serves it at the perfect temperature to feed your baby in just 2 minutes.

Highest Rated in Breast Milk Storage

If you wish to re-use the sponge filters, then rinse the sponge in warm water and leave to air dry. Place the items inside the steriliser. Separate all components and ensure all surfaces that need to be sterilised are visible. Made from durable, crystal-clear tritan plastic, the collector bottles resist daily scratches and stains from repeated use allowing you to easily see how much your little one has drunk in a glance. And for added convenience and reassurance, all parts are sterilizer and dishwasher-safe making cleaning and sterilizing a breeze.