Sika SikaBond Rapid DPM (Damp Proof Membrane) Liquid, 5 Litre

Product Information

whilst remaining permanently elastic thus accommodating differential movement associated with changing climatic conditions. Surface conditioner/ primer: 1 coat, 100-200 g/m 25 to 50 square meters per 5 litre depending on surface. Basement/below ground floors must be adequately protected with a damp proof course and two coats of SikaBond Rapid DPM.

Ensure you leave a 12-15 mm expansion gap along the walls and around protrusions to allow for the natural expansion of the wood. All surfaces must be sound, clean, dry and free from dust, grease or other contaminants that can reduce adhesion. Bonds directly to all common subfloor materials concrete, wood, metal, ceramic tiles, vinyl, and most natural stone floors.Compatible with all SikaBond® wood floor adhesives. Especially suited to refurbishment projects where old adhesive residues are present. Fresh, uncured adhesive remaining on the wood surface must be removed immediately and if necessary cleaned with Everbuild wonder Wipes. Sikabond MS has an open time of approximately 60 minutes this makes this product also ideal for larger areas and ease of adjustability. To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

I have used a moisture content meter, pin type, and have a consistent reading of 1.2 - 1.4 % across the floor. I have no idea what is or isn't an acceptable moisture content. Is this a good figure? Am actually needing to paint a liquid DPM at all with this kind of reading? I'd rather do so in truth.To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. Spread the adhesive uniformly on the sub-floor with a suitable notched trowel at no less than 0.6kg m2. Absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

In areas such as basements, or other areas without a functional damp proof membrane preventing hydrostatic water vapour pressure, SikaBond Rapid DPM must only be installed after the application of Sikafloor 81 EpoCem. For detailedResidues of old adhesive not being isolated with Sika Primer-MB or SikaBond Rapid DPM must be removed mechanically as they may affect adhesion.