Sika Sikabond 5500s Parquet and Wood Floor Adhesive | Solvent Based Rigid Adhesive for Wood Block and Engineered Wood Flooring - 16kg

Product Information

full surface bonding with SikaBond® Dispenser-5400 / -3600 / -1800: solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet as well as chip boards can all be bonded; SikaBond®-5500 S can be used without priming on cement floors, poured asphalt and wooden floor panels providing they are dust free and permanently dry.

Substrate Quality: Clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed. reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate; Floor may be walked on sanded & finished approximately 48 hours after installation depending on climatic conditions,to 1.2 kg per meter square depending upon size of notched trowel used and subfloor surface profile. In case of chemically pre-treated types of wood floors (e.g. ammonia, wood stain, timber preservative) and woods with high oil content SikaBond 5500 S is only to be used after a written recommendation following trials from our Technical Department. Clean all tools and application equipment with Sika Remover 208 or Thinner EG immediately after use. Hardened / cured material can only be mechanically removed.

SikaBond 5500S can be used without priming on cement floors, poured asphalt and wooden floor panel providing they are dust free and permanently dry.Sikabond T52 FC Elastic wood flooring adhesive: is a gun or trowel applied elastic wood flooring adhesive for use with any width board. It is also used in conjunction with silent layer mats as part of the AcouBond system. underfloor heating: after through preparation and commissioning of the heating system, the entire floor area must be primed using a mixture of 1 part SikaBond 5500S to 1 part Sika Thinner EG (by volume). Roller apply and allow to cure; The substrate must be clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed. full surface bonding: solid and engineered wood floors - (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards can all be fully bonded;