10 x Mini Micro JST 2.0 PH 3 Pin Male/Male with 150 mm Cable and Female

Product Information

Even if you don't manage to get the leads through the holes, you could bend the outer ones at right angles and merely solder them to the tops of the pads (less mechanical resilience being the trade-off. Number of contacts varies from 2 to 16 pins • 10mm pitch with 2 circuits and 5mm pitch with 6 circuit housings are also available • Nylon 6, UL94V-0. This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications.

This cable is made up of bright and colourful 6x 28AWG wires, twisted together and with a 6-pin JST SH connector at either end! The adapter has 150mm red/black leads for connecting to a charger's main output; these leads either have bare ends for you to fit your own connectors or are available fitted with 4mm plugs that are compatible with the sockets on most LiPo chargers.The XH connector was developed based on the high reliability and versatility of our NH series connectors. This 12-inch (30-cm) cable has three 26 AWG wires with a 3-pin female JST PH-style connector that matches the connector on Sharp analog distance sensors that have 3 pins (see the sensors - opto section). Currently, malfunctions caused by poor connectors account for more than 37% of all equipment failures.

By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising.This is a handy cable for connecting a five-pin JST GHR-05V type locking connector to breadboard-friendly male pins. The JST connector plays the role of conducting current and connecting signal in electronic equipment. Any images used are representative of the product only and may not accurately depict the actual product. Can only be used with any low current products such as 12v grain of wheat and grain of rice bulbs and also many LEDs. At Railwayscenics we do everything we can to make sure that the information included on our product pages is always as accurate as possible.

We have switched to packaging that is either fully made from, or partially made from, recycled materials, which is helping to reduce our impact, and carbon footprint, on the environment. The 3 pin plugs are increasingly used on small 2S LiPo batteries for dual use as power and balance connector. We also send out a weekly e-newsletter detailing any offers we have on, plus lots of product and other news. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).pin JST to Breadboard Jumper Cable is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. Railwayscenics is a family run business, and since 2008 we have built an enviable reputation for providing a first class service, and a range of affordable, high quality products, used by hobbyists and modellers.