2 x 6.35mm 1/4" Stereo TRS Jack Lead/Balanced Signal Audio Patch Cable / 2 Pack 3m Black/Black

Product Information

When you connect your cables to instruments or equipment with loud signals, such as guitars or keyboards, they are loud enough that any extra noise that might be picked up by the cable will be unnoticeable – the sound from the guitar or keyboard will easily mask and muffle the unwanted noise in a way that wouldn’t happen on a relatively quiet signal from equipment such as a microphone. Although you can use unbalanced cables for very short runs, and probably not have any issues, you will still run the risk of getting an unnecessary hum through your speakers with any other electrical interference. Main FeaturesConnectors: Balanced 1/4 inch male jack to balanced 1/4 inch male jackLength: 3 metres / 10ftREAN connectorsStagg NAC3PSR balanced 1/4 inch male jack to balanced 1/4 inch male jack cable.

If you do hear unnecessary hum or distortion that would mean that there is too much signal noise or interference. You must be employed at least 16 hours per week, self-employed, retired in receipt of a pension or receiving disability payments. These cables are commonly used by DJs for connecting mixers and controllers to other pieces of audio equipment. Main FeaturesConnectors: Stereo minijack to balanced 1/4 inch male jackLength: 1 metre/3ftREAN connectorsStagg NAC1MPSPSR Stereo minijack to balanced 1/4 inch male jack cable with REAN connectors. Easy Storage – Included with every cable is a VisioSound cable tie allowing you to keep your leads neat and tidy.

The plugs fit with a satisfying latch and have decent strain relief before the body of the cable, so I think they’ll take a lot of punishment before they give up. If you sum two signals that are identical but are reversed in polarity, the signals cancel out, leaving you with silence. NP3X-BAG to NP3RX-BAG - Straight to right-angled 3 pole Jack cable connectors with black metal housing and Silver contacts. For anyone capturing their audio from a studio or recording booth, the distance traveled by your cable is likely short enough to not pick up distortion.

They will be able to provide more specific troubleshooting recommendation for audio-specific use cases. NP3X-B to NP3RX-B - Straight to right-angled 3 pole Jack cable connectors with black metal housing and Gold contacts. As in the unbalanced cable, the ground wire still surrounds the signal wires and is used as a shield against interference.This is because at this length, any distortion is unlikely, and the simplicity of unbalanced cables can work wonders when there’s no detriment coming from potential distortion. The ground wire serves two functions—it carries part of the audio signal and serves to shield the main signal wire to some degree from outside interference from noise such as the hum from lights and transformers, as well as RF (radio frequency) interference that comes from TV and radio transmissions. The cables used in an audio system—and how they’re put together—can have a major impact on the sound of the system.