Joint It Simple Jointing Mortar Dark Grey (1 x 20kg) - Large Size

Product Information

During and after applying Joint-It Simple™ be careful not to walk across the paving with dirty boots as doing so will leave dirty footprints on your paving. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7. However as a precaution, and to ensure the safety of pets and children, we do recommend that you keep them away from the area for 24 hours during and post-application, as the product may be harmful if ingested.

Effortlessly lay down this sweep-in Joint-It Simple paving grout quicker and easier than most other jointing compounds. Joint it does not leach and is non-staining, so it is safe for natural stone, but limestone and honed black granite should be pre-sealed before pointing with Joint it simple. With minimum effort and maximum results, you need hard and soft broom water, preferably a hose and a tub of Joint It simple.There is a simple test you can carry out to determine if your pre-existing base is permeable or not. However Joint-It will set rock hard and the specialist mix will ensure that it stays in your joints for years to come. If anything is left behind after this or residual material, you can sweep away afterwards using a soft brush, it is worth giving the broom a quick clean, wip over, before doing this. We will issue a refund for any amount above 2 damaged slabs per pack upon provision of photos showing the damaged slabs, received within 7 days of receipt of goods.

This is because Joint-It Simple is a water permeable product, meaning water is able to move through it. To get the best results from Joint-It Simple, joints must be a minimum width of 3mm and a depth of 25mm for the joint to have stability when it is set. Our natural sands harden on contact with air, so simply wet the area, brush in the product, and leave it to do the rest.Joint-It Simple is a cement free, water permeable, ready-mixed brush-in paving jointing compound, that has been made from a mixture of seven specialist, non-hazardous, sands and adhesives, that gives a rock hard finish preventing unsightly weed growth. We recommend using Joint-It Premium Seal prior to laying paving if you are using Slate, Black or Blue Limestone or Honed Black Granite. This prevents any dye from the flower petals transferring to the paving while it is being soaked with water. Still, more effort is required to get the product to full depth, faster and easier to apply than traditional methods. Joint-It Simple – is a ready-mixed, permeable, jointing compound that can be applied in all weathers.