M14 (14mm x 50mm) Hex Bolt (Fully Threaded Setscrew) - Steel (Pack of 10)

Product Information

where bolts transmitting load in shear and bearing pass through packing plates of total thickness t p greater than d / 3 the design shear resistance F v,Rd should be multiplied by the reduction factor β p specified in EN1993-1-8 equation 3.

Therefore for countersunk bolts the calculated tension resistance F t,Rd should be reduced by a factor of 0. use in applications such as access panels, number plates and many anti-vandalism securing solutions. Zinc Flake coated high tensile steel class 12 - a higher tensile non-stainless grade for screws and bolts.

Minimum and maximum spacing p 1, p 2 and edge distances e 1, e 2 for bolts are given in EN1993-1-8 Table 3. the design shear resistance F v,Rd should only be used where the bolts are used in holes with nominal clearances not exceeding those for normal holes as specified in EN 1090-2 'Requirements for the execution of steel structures'.

for long joints where the distance between the centers of the end fasteners measured in the direction of load transfer is more than 15 d the design shear resistance F v,Rd of all the fasteners should be multiplied by the reduction factor β Lf specified in EN1993-1-8 equation 3. For bolts with cut threads where the threads do not comply with EN 1090 the relevant resistances should be multiplied by a factor of 0. The punching resistance of the bolt B p,Rd should be verified against the applied tensile load F t,Ed in accordance with EN1993-1-8 Table 3.The bearing resistance of the bolt F b,Rd should be verified against the applied shear load F v,Ed in accordance with EN1993-1-8 Table 3. The design resistance of a group of fasteners may be taken as the sum of the design bearing resistances F b,Rd of the individual fasteners provided that the shear resistance F v,Rd of each individual fastener is greater than or equal to the design bearing resistance F b,Rd. A2 stainless steel is perfect for outdoor applications exposed to the elements as they will not be prone to rusting.