DRYSEAL PENETRATING DAMP WATERPROOF TREATMENT CREAM 3L

Product Information

It must be ensured that water and damaging salts dissolved in the water cannot penetrate behind the treated surface since this can lead to frost damage (spalling). DrySeal has a unique, thixotropic consistency and excellent water-repellent properties on a range of building materials. It certainly is quite expensive however we all know that not dealing with damp correctly could cost well in excess of the cost of this. Dry-Seal waterproofing cream offers excellent adhesion to vertical and overhead surfaces and outstanding impregnation that can only be matched by 3 or 4 treatments using a liquid water repellent cream. This concrete water repellent is supplied in a 3kg tub and is applied by brush, roller or spatula at the rate of 0.

Dependent on porosity, the effective siloxane ingredient deeply penetrates the substrate within a short period of time (between 30 minutes to several hours) where it reacts to become a polymer silicone resin. With its unique thixotropic consistency and excellent water repellent properties on a range of building materials, Wykamol Dryseal Waterproofing Cream stands out. The initial white layer disappears completely and, since the effective ingredient is the same as in conventional liquid water repellents, substrates treated with Wykamol Dryseal remain permeable to water vapour (allow the structure to ‘breathe’). This still applies for deliveries out of our local area but please note that we use independent carriers so be aware that there may be external factors which we cannot control (e.

We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you've provided to them or that they've collected from your use of their services. A damp wall will be chilled by evaporation ( similar to the wind chill effect ) and will be below ambient temperature.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Ideal for walls with cavity fill insulation, to prevent saturatuion through rain penetration, Ideal for walls with cavity fill that has already become saturated, as DrySeal allows the masonry to breath encouraging it to dry out and preventing any further water ingress. Only open containers to remove the amount of product required and then close the lid once the product has been taken out. In extreme recent weather this wall is letting in water and affecting plaster at top of window frame. I applied the cream by hand using a small 30mm paint brush, quite a task but seems to have worked well .The walls have already been rendered but not painted, and I don't mind if the waterproofing means I won't be able to paint over it. The stuff is meant to be completely waterproof (sheds water and dirt by beading) soaks into porous stone and mortar up to 17mm depth and dries to a breathable, clear coating lasting minimum 10 years.

Climashield Masonry Protection Cream is a VOC free, water based, protective treatment brick waterproofer, specially formulated to create strong waterproofing properties on brickwork, masonry and render. Evergreen climbers provide winter insulation, by not only by maintaining a pillow of air between the plant and the wall, but by reducing wind chill on the wall surface. we did use 'waterseal' about 10 years ago, but I would guess that needs redoing now - also this new stuff is supposed to be breathable which would be good. High salt concentrations (especially chlorides, nitrates and sulphates) may lead to damage that cannot be prevented by a water repellent treatment alone.

Coverage was exactly as stated on the tin, and again as stated did darken the brick and mortar joints slightly. The deeply penetrating Masonry Cream is a very effective damp proofer and brick sealer that forms a strong barrier against penetrating damp. We really appreciated their expert and invaluable advice, not just in terms of the damp, but also about Victorian homes more broadly.

DrySeal also protections against pollutants and damage from frost and salt, and prevents water penetration even under wind pressure. DrySeal is a unique, thixotropic, water-repelling masonry protection cream which can be used on a range of building materials.Surface Preparation - Dryseal is especially useful for treating cementitious materials including concrete blockwork as well as natural stone, clay and sand/lime bricks etc. Once the interior has been insulated, I won't know if the waterproofing is working or not, so I feel I have to make sure I have a very good (budget allowing) waterproofing for those exterior (porous) breeze block walls. The silane cream remains on the surface after application and penetrates deeply into capillary pores over time until fully absorbed. The effect was that the chimney no longer soaks up the rain at all, and the chimney breast where it comes down through the loft is now bone dry and has been so for the past 19 months. Chase out defective mortar joints and cracks and repair with a suitable re-pointing mortar (see Soudal Repair Express Cement).