276°
Posted 20 hours ago

Grandstream HandyTone HT801 ATA

£20.275£40.55Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

For GXW42xx V2 device on 1.0.1.4 or earlier version to upgrade to 1.0.17.1, the HTTP firmware upgrade path is: Grandstream recommends using HTTP protocol for firmware upgrades. Please note our public firmware upgrade server is using HTTP. It is therefore ready to use immediately and is supplied with a call bundle of 20 minutes of UK landline and mobile calls for use during a 14 day trial period. If there's more than one VoIP phone/device on the same local network, assigning each different local UDP ports will avoid port conflicts.

SIP profile through 1 FXS port on HT801, 2 SIP profiles through 2 FXS ports on HT802 and single 10/100Mbps port on both models. On the HT802 inter-port calling is achieved by dialing ***7X (X is the port number). For example, the user connected to port 1 can be reached by dialing *** and 71. Flash Digit Control The HT801 is designed to connect to a VoIP phone service where a traditional landline is not required or is not available (eg fibre-to-the-premises broadband connections). Assuming that phones A and B are in conversation. The phone A wants to blind transfer phone B to phone C: The HT801 and HT802 are designed for easy configuration and easy installation, to connect your HT801 or HT802, please follow the steps above:

That’s a wrap

Grandstream’s HT818 gives users access to the above features and has a total of eight FXS ports. Advantages of Grandstream’s ATA HandyTone Series Delayed Call Forward. Dial “*92” and then the forwarding number followed by “#”. Wait for dial tone then hang up. From our assessment of the ATA, setup is easy, as is management. For businesses looking to maximize productivity and efficiency of overall communication – the HandyTone Series will more than suit your interests.

Although the HT801 adaptor can be connected to any VoIP phone service, we supply it pre-configured for connection to the Premitel VoIP Phone Service. Advanced telephony features are too a possibility, including call transfer, forwarding, waiting, do-not-disturb, ‘message waiting’ indication, multi-language prompts. The UC provider, furthermore, has a flexible dial plan. The primary differentiator between HT801 and HT802 is the number of phone lines you get.Cancel Unconditional Call Forward. To cancel “Unconditional Call Forward”, dial “*73”, wait for dial tone, then hang up. Please refer to the user manual for more information about IVR and how to access its menu options. REBOOTING HT801 Using Web UI The HT801 supports 1 FXS port which can be configured with 1 SIP account, while HT802 supports 2 FXS ports which can be configured with 2 SIP accounts. Please refer to the following steps to register your accounts via web user interface. As mentioned previously, The HT801/HT802 has a built-in voice prompt menu for simple device configuration. Please refer to “ Understanding HT801/HT802 Interactive Voice Prompt Response Menu” for more information about IVR and how to access its menu.

Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call. The HT801 support Bellcore style 3-way Conference. To perform the 3-way conference, we assume that the call is established between phone A and B. Phone A (HT801) wants to bring third phone C into conference: Updated Time Zone option “GMT+01:00 (Paris, Vienna, Warsaw)” to “GMT+01:00 (Paris, Vienna, Warsaw, Brussels). Note: For GSC3610/3615 HW1.0A, 1.0B and HW1.0C, firmware 1.0.3.8 is used and cannot upgrade to 1.0.7.x. Firmware 1.0.7.x is for GSC361x HW1.0D only. When placing the analog phone that is connected to the FXS port off hook, the dial tone will be played even if the sip account is not registered. If users prefer the busy tone to be played instead, the following configuration should be made:If phone C answers the call, phones A and C are in conversation. Then A can press “Flash + 4” to complete transfer. You'll find the correct Firmware Server Path for your Grandstream at: www.grandstream.com/support/firmware Testing your Phone's setup:

Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. Insert the ethernet cable into the internet or LAN port of the HT801 and connect the other end of the ethernet cable to an uplink port (a router or a modem, etc.) Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial “*93”, wait for dial tone, then hang up. For WP820 hardware V3.0C and V3.1C, once it's upgraded to 1.0.7.66 or higher version, downgrading to 1.0.7.61 or lower firmware is not supported. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit like phone number or a phone number.

Our review of the adapter series covers key features, advantages, pricing, as well as how to buy. Features of Grandstream’s HandyTone ATA Series Grandstream HT813 There are 3 LED buttons on HT801 and 4 LED buttons on HT802 that help you manage the status of your Handy Tone. Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone then hang up. GXW42xx V2 has "V2" printed for model name. For example, "Model: GXW4216 V2". If the model name doesn't have V1 or V2 printed, the device is GXW42xx V1.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment