About this deal
Zinsser Perma-White Interior Matt Paint–is ideal for areas where a low sheen finish is desired. As a durable paint with a long lasting protection against mildew and mould, this matt finish will be ideal for basements and kitchens. If the timber is structural then it should be replaced if there is fungus growing, if it is just shelving or other then proceed as follows togive a good level of protection. Dispose of contents and container in accordance with all local, regional, national and international regulations.
Clean up spills and drips with a wet cloth or rag. Wash application tools in warm, soapy water immediately after use. P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P101 If medical advice is needed, have product container or label at hand.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302 + P352 IF ON SKIN: Wash with plenty of water/…P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. Finally apply 2 coats of Zinsser Perma-White Interior Satin. This is a great product for bathrooms and areas of high humidity. It can also be mixed to a wide range of colours.If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume Clean surfaces with a solution of one-cup household bleach per gallon of water or a quality biocidal wash.
Satin: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.12% by weight. NOTE: Perma-White® is formulated with a mildewcide approved for paint use and does not contain mercury or lead compounds. To prevent product from skinning over close container after each use. Keep lid tightly closed during storage. Protect from freezing.NOTE: Minimise the use of the shower, avoid high levels of steam and condensation for the first week after applying the Perma-White, this is to allow it to fully harden and reach full moisture resistance, otherwise the coating may be damaged if it is subjected to condensation and water vapour while it is still curing. Further safety information can be found in the safety data sheets available in the attachements section above. PaintWell increased its Industrial Paints offering with the acquisition of Promain UK Limited, the preferred UK distributor for many of the world’s leading paint and surface coatings manufacturers.