Flycatcher SSP992 smART sketcher 2.0 Activity Cartridge-Under the Sea, Multicolor

Product Information

If you denied the App access to your device location and selected “Don’t ask again”, the Android system will not prompt you again to allow access. Instead, you will need to manually enable Location access permission for the smART sketcher®app.Note:the actual screens and steps may be a little bit different depending on your device vendor and model.

Write and playLearn to form upper case, lower case and cursive letters the correct way with step-by-step instructions, plus curriculum-based early reading content, and lots of space to practice your skills! When using activity SOS mode, each step of the drawing is transferred to the smART sketcher® Projector via Bluetooth. As a result, it takes more time to project a drawing. Each SD card only works with a single smART sketcher® Projector. Once it’s programmed into one Projector, you can’t move it to another. If you have more than one Projector, make sure you’re using the SD card in the correct device. If you see the below “Activation Err” message, it means the SD card may already be programmed into another Projector. If another SD card was detected in the smART sketcher Projector ear, the following message will be shown: Please note that on some mobile devices the App won’t be able to automatically redirect you to the device Android Location services settings and you will need to manually enable Location services in Android settings.

Sketch and color

The Flycatcher account creation is a one time setup. Flycatcher is the corporate name for the smART sketcher® Projector. Once an account is created, the App will remember the account details. Your Flycatcher account can then be used for all future products from the company. If you already have a Flycatcher account, follow the steps in this Link.

Turn on Bluetooth on your device. Note: no need to pair and/or connectyour device to the smART sketcher® Projector from your device Bluetooth settings menu; The App will automatically locate the smART sketcher®Projector. After the free-trial, a monthly/yearly auto-renewable subscription will be activated. We’re pretty sure you’re going to love this, but if you don’t, you can cancel your subscription anytime. Sketch, draw, and learn to write like a pro using the smART sketcher® Projector and this FREE APP. Step-by-step instructions guide small – or large – hands through the entire process. It makes learning playful and engaging. Just as it should be! Note: You need to have a smART sketcher® Projector or smART sketcher® 2.0 Projector to use this app.Pull out the batteries compartment and insert 4 x D batteries according the polarity that is engraved on the plastic. Compatible with smART sketcher® 2.0 Projector and smART sketcher® GO!, NOT compatible with the original smART sketcher® Projector.

We encountered a problem while creating your subscription – the subscription feature is not supported on the current device.” Choose one of the three filters at the bottom of the screen. Adjust the brightness by swiping the slider. The Flycatcher account creation is a one time setup. Flycatcher is the corporate name for the smART sketcher® 2.0 Projector. Once an account is created, the App will remember the account details. Your Flycatcher account can then be used for all future products from the company. If you already have a Flycatcher account, follow the steps in this Linkto login.

NEW!!! - Play smarter!

USB power plug (not included). USB power plug requirements: Output5V DC, minimum 1.2A.Do NOT use a fast charging power plug as the output voltage might be higher than 5V (most fast charging power plugs support multiple output voltage). The App will search for a smART sketcher® 2.0 Projector. Make sure your Projector is nearby and turned ON. Try the Super smART subscription by signing up to our 1 month free-trial¹. We’re pretty sure you’re going to love this, but if you don’t, you can cancel your subscription anytime. If the App fails to locate the smART sketcher®Projector, please make sure that Location services are Enabledon your mobile device. This is done from your mobile device settings menu and may change per vendor and Android version. The App will automatically detect if Location services are enabled or disabled. If Location services are disabled, the App will show a message prompting you to enable Location services. Select “Subscriptions” from the navigation menu and scroll down to the smART sketcher projector app.