Makita HR4013C/1 110V SDS-Max AVT Rotary Demolition Hammer Supplied in A Carry Case

Product Information

The new Makita HR4013C SDS max rotary hammer will punch a 40mm hole in concrete and with a 1,000 watt motor that will run up to 500rpm without load, this machine will generate up to 2,900 blows per minute for 7.6 Joules of impact energy. This represents a 25% increase over the popular HR4011C model that it supersedes. Makita supports the creation of an enriched society on a global scale, through the provision of power tools, outdoor power equipment, and pneumatic tools. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds Overall, the Makita HR4013C is a great choice if you’re looking for a rotary hammer with soft vibration, especially if user fatigue is your biggest concern. Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2

The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s².Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body. Easy to operate operation-mode change lever, located on the top of the motor housing for reduced possibility of breakage

In hammering mode, on/off switch is switchable between two switches to meet your application, for continuous or intermittent chiselling applications For jobs that require a lot of power (e.g. hard clay soil and trenching), you’ll definitely like the Makita HR4013C and its 11-amp motor. Furthermore, its anti-vibration technology helps a lot when it comes to tough material and leaves you feeling less tired afterward. Aside from the warranty policy, what you might find useful is the LED service light. This helps you easily identify when something may be wrong with the tool, so you can take it to the nearest service center. Usability

Pros of the Product

Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit As mentioned earlier, using this hammer drill’s anti-vibration technology (AVT), you’ll experience fewer vibrations when you handle the tool. Of course, it doesn’t mean that all the vibration is gone, but it will make it more comfortable to handle than your standard rotary hammer. This would be a big plus for beginners (or seniors) who aren’t so comfortable with long hours of demolition jobs. It has a soft start feature.

L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced Makita always delivers the best quality for its customers. All Makita products are bound by a one-year limited warranty. They’ll repair your tool free of charge once proven that the tool had defects in workmanship or material. The vibration absorbing housing offers unrivalled low level of vibration. In hammering mode, the on/off switch is switchable between two switches to meet your application, for Continuous or Intermittent chiselling applications. The Makita HR4013C’s 11-amp motor has up to 8.4 foot-pounds of impact energy. Weighing just over fifteen pounds, it sports a maximum concrete drilling capacity of 1-9/16 inch. This rugged 2-mode machine – rotary drilling with hammer action and hammer action-only for chiselling - has the easy-to-operate mode change switch positioned conveniently on top of the motor body ahead of the vibration reducing rear grip handle. With variable speed controlled by the grip trigger, and a constant speed control that can be set for constant running when chiselling, the HR4013C can also be used with the trigger controlling chiselling for intermittent work.Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs Variable speed control dial enables user to match the speed to the application for greater versatility The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light indicating when to replace carbon brush, preventing additional damage to the gearings.