Salamander Pumps - CT75 Xtra Shower Pump - 2.0 Bar Pressure - Twin End - Suitable for Positive Head, Gravity Fed Systems Only - WRAS Approved…

Product Information

The new Salamander CTXTR pump replaces the long standing CT75. This is still supplied with 15mm compression flexi hoses and boasts a quieter motor than the previous CT75 model.

Regular Updates: Our recommendations stay current with any changes in product performance or availability. Each pump whether a single or twin pump is supplied with one or two straight anti-vibration (AV) couplers. This arrangement of couplers facilitates the connection of the supply pipework from any direction. Bought as a replacement. East to install. Much quieter than our previous pump. Works well. No problems so far. The Salamander range of CT Xtra Shower Pumps are tough, easy to fit general purpose twin booster pumps, this range will boost the hot and cold water supplies to thermostatic or manual shower mixer valves.Hands-On Expertise & Collective Knowledge: Our team boasts extensive DIY experience and in-depth knowledge. The new Salamander CT75+ XTRA pump replaces the long standing CT75. This is still supplied with 15mm compression flexi hoses and boasts a quieter motor than the previous CT75 model. You will need to measure the flow rate to determine if a positive head pump is suitable for your system. You will need to test all outlets, such as showers and taps, that are going to be pumped to determine if they have the required minimum flow rate of 2L/min. Watch our video to learn how to measure the water flow rate.

An excellent pump, easy to install, instructions where straight forward with good advise. The first one Iv used and was very pleased with the low noise, I also used a Salamander pump mat. Cold water is delivered to the cold-water storage tank from the water mains. Cold water from the cold-water storage tank is then supplied to the outlets around the system, such as taps, toilets, showers and baths. A positive head pump will activate when a minimum flow of water passes through the pump and out of the pumped outlet, such as a shower or tap, naturally (without assistance from the pump). The minimum flow rate required for our positive head pumps is 2 litres of water per minute (L/min). The CT75 Xtra is suitable for conventional showers, Victorian can style shower heads, multi-function showers, massage function or champagne spray.

Returns

The patented technologies used in the new CT Xtra and new CT FORCE ranges, are industry leading, and give both the consumer and installer excellent performance, and are easier to install. This will be the second pump from plumbworld, the first, same pump doing many miles, a compact, reliable unit, thoroughly recommended