20x Plastic 4mm Screw Grommets for - Wheel Arch Lining, Bumper & Interiors

Product Information

For your convenience, you can also get fan filter sets, which provide you with a finger guard, filter cover, mesh filter and felt filter.

Heat-Stabilised Nylon: shares the same mechanical properties as Nylon 6/6, but also has the advantage of heat stabilisation. Stand up to 125˚C (257˚F) temperatures. LED components, such as LED spacer mounts, position and restrict movement of your LED lights. LED spacers raise the LED from the board surface and provide more stability, rigidity and height conformity. This rigidity and stability make the manufacturing process easier. It’s also vital when the board is serviced, or when the PCB or other parts need repairsSo what exactly is the difference? Spacers are unthreaded, with a through hole. Standoffs are threaded on both ends and come in both male and female designs. Sometimes you’ll see the description “threaded round spacer”. This is a standoff, because it’s threaded. The bottom line is, they have the same purpose. The difference is in whether or not they’re threaded.

Generic term for a range of copper-zinc alloys with various properties, which include strength, machinability, wear-resistance, ductility, hardness, electrical and thermal conductivity, and corrosion resistance. Glass-Filled Nylon: gives materials tensile strengths of up to 32,000 psi, which is around 200% higher than the base resin. Also, heat deflection temperatures increase from 75˚C to 130˚C (185˚F to 266˚F). Typically, a cable grommet is round in shape and is made up of two pieces—the inner and outer pieces. The inner piece is fitted into the hole in the metal panel or application and the outer part fits over the inner piece, creating a seal. This seal helps keep out dust, dirt and moisture from environmental impacts or to provide a secure and firm grip on the wire or cable. Materials & types of cable grommet Impact-Modified Nylon: extremely high-impact strength at low temperatures and resistance to heat distortion, compared to Nylon 6/6.Rubber Grommets: Usually made from thermoplastic rubber and EPDM and are typically used to protect wires and hoses from abrasion and damage. Mounts help position and secure your fan. You can even get anti-vibration rubber fan mounts to reduce noise generated by the fan. These type of fan mountsare usually made out of an elastomer, such as silicone rubber or Acrylonitrile-Butadiene-Styrene (ABS). Fans are your best option for your PCB’s heat management. To enhance your fan’s safety and efficiency, you’ll need the right parts. When mounting your fan, you can simplify the process and save time and money by eliminating the need for screws and nuts with fan rivets. Fan snap rivetshave prongs that expand to hold securely as the pin is driven in. Another option: push fan rivets, which are also easy to install and expand when pushed in for a tight fit. To remove, simply pull the head.