Cisco SFP-10G-SR= SFP-10G-SR Network Media Converter

Product Information

Cisco VIC 15428: Recommended UCSM release and IMM release is 4.2(2) or later that contains VIC firmware 5.2(2) or later, and recommended standalone CIMC release is 4.2(2). Review note under Table 2 for minimum version required. The Firepower 2100 chassis has a standard RJ-45 console port. You can use the CLI to configure your 2100 through the RJ-45 The Cisco UCS Virtual Interface Card (VIC) 15000 Series extends the network fabric directly to both servers and virtual machines so that a single connectivity mechanism can be used to connect both physical and virtual servers with the same level of visibility and control. Cisco ® VICs provide complete programmability of the Cisco UCS I/O infrastructure, with the number and type of I/O interfaces configurable on demand with a zero-touch model. The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Cisco SFP-10G-SR transceivers are input/output devices that are hot-swappable. They are linked with a fiber optic network via a 10 Gigabit Ethernet port. Since these transceivers are MSA compliant and hot-swappable they can be plugged into any Cisco SFP+ based transceiver port directly. You won’t need to power them from the host network system for this. What this does is to make add-ons, moves, and exchanges fast and efficient.

Cisco has introduced that the S-class modules are suggested to be used in enterprise network. In addition, the operating temperature range is smaller, thus, S-class module is recommended for shorter transmission distance applications compared with other standard modules. On the Firepower 2130 and 2140, the OK LEDs on the rear power supplies flash after the switch is turned off; this is expected Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco Note: Up to eight 2-Gbps DWDM SFP modules are supported in a single Cisco MDS 9000 Series switching module. Refer to https://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html for details. is in the OFF position, the system powers off after shutdown is completed. Do not remove the AC or DC power source while thisAll other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. of the optical link partner such as how it handles link faults and debounce timing; spanning tree protocol convergence; dynamic

Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible. The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz *km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz *km MMF (OM4), up to 400m link lengths are possible. The power supplies can supply up to 350 W power across the input voltage range. The load is shared when both power supplyInline interfaces—Connection to any two like ports (10 Gb to 10 Gb for example) on one network module, across network modules, As a device that provides additional application control, URL filtering, or IPS/threat-centric capabilities: The Firepower 2130 and 2140 support two AC power supply modules so that dual power supply redundancy protection is available.

The 1-Gb SX /10-Gb SR/10-Gb LR network modules have the following insertion loss measurements. Insertion loss measurements help you to If you have an inline interface set with a mix of hardware bypass and nonhardware bypass interfaces, you cannot enable hardware Threat Defense and Cisco ASA software. See the Cisco Firepower Compatibility Guide and the Cisco ASA Compatibility guide, whichA SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.